Cross Pile Point (Pipe Pile Tip) - Foundation Piling Essential Embedded Part
Product Core Parameters
Parameter
Details
Produt Name
Cross Pile Point (Pipe Pile Tip)
Material
Q235B, Q355B (optional)
Available Sizes (Outer Diameter)
300mm, 400mm, 500mm, 600mm (custom sizes available for large projects)
Application
House construction, bridge, viaduct, industrial workshop, road construction, high-rise building foundation, etc.
Processing Technology
Precision cutting, integrated welding, surface anti-rust treatment (galvanizing or painting optional)
Installation Method
Welded to the end plate of the pipe pile before piling, easy to operate on construction site
| Parameter | Details |
|---|---|
| Produt Name | Cross Pile Point (Pipe Pile Tip) |
| Material | Q235B, Q355B (optional) |
| Available Sizes (Outer Diameter) | 300mm, 400mm, 500mm, 600mm (custom sizes available for large projects) |
| Application | House construction, bridge, viaduct, industrial workshop, road construction, high-rise building foundation, etc. |
| Processing Technology | Precision cutting, integrated welding, surface anti-rust treatment (galvanizing or painting optional) |
| Installation Method | Welded to the end plate of the pipe pile before piling, easy to operate on construction site |
Material Introduction
We adopt two high-quality steel materials for our cross pile points (pipe pile tips), Q235B and Q355B, which are widely used in construction engineering and have excellent mechanical properties and processing performance. These materials ensure the durability and reliability of our cross pile point, a key foundation piling embedded part. The specific characteristics of the two materials are as follows, helping you choose the most suitable option according to the project requirements:
| Material Model | Strength Performance | Processing Performance | Suitable Scenarios |
|---|---|---|---|
| Q235B | Low carbon steel, yield strength ≥235MPa, tensile strength 370-500MPa, moderate strength | Excellent weldability and cutting performance, no complex pre-treatment required, low processing loss (3%-4%) | Ordinary residential buildings, small bridges, general industrial workshops, projects with moderate bearing requirements that need a cost-effective Q235B cross pile point (pipe pile tip) as foundation piling embedded part. |
| Q355B | Low alloy high-strength steel, yield strength ≥355MPa, tensile strength 470-630MPa, good impact toughness (20℃ impact energy ≥34J) | Good weldability (preheating required for thick plates >20mm), processing loss 4%-5%, higher precision requirements | High-rise buildings, large bridges, viaducts, heavy industrial plants, projects with high bearing and anti-seismic requirements that require a high-strength Q355B cross pile point (pipe pile tip) as foundation piling embedded part. |
Product Performance Advantages
The cross-shaped structure of our cross pile point (pipe pile tip) is designed to effectively break through strong weathered rock layers and complex soil layers, helping the pipe pile to quickly sink into the bearing layer and improve piling efficiency for foundation projects using this essential embedded part.
The integrated welding structure of the cross pile point ensures high connection strength with the pipe pile, effectively dispersing the pressure of the upper structure, preventing foundation settlement and deformation, and enhancing the overall stability of the foundation piling project with this reliable pipe pile tip embedded part.
The surface of our cross pile point (pipe pile tip) is treated with anti-rust (galvanizing or painting), which can resist the erosion of underground moisture and harmful substances, and extend the service life of the pile foundation with this foundation piling embedded part in harsh environments.
Our cross pile point (pipe pile tip) features a lightweight design, easy to transport and carry, can be directly welded to the pipe pile end plate on the construction site, saving construction time and labor costs for projects using this foundation piling embedded part.
Our cross pile point (pipe pile tip) has multiple sizes available, and custom processing can be carried out according to the actual needs of the project, suitable for various geological conditions and construction scenarios that require a reliable foundation piling embedded part.
Application Fields
✅ Viaduct & Road Construction: Viaduct piers, road subgrade reinforcement, interchange ramps, etc.
✅ Industrial Construction: Industrial workshops, warehouses, factory buildings, especially heavy industrial plants that need to bear large equipment weight
✅ Other Projects: Municipal engineering, port terminals, high-speed rail stations, airport runways and other large-scale infrastructure projects
Construction Notes
Related Industry Resources
Get Started with Your Custom Welding Parts Project
Requirement Consultation: Provide drawings (CAD/DXF) or samples, specify material, size, tolerance, quantity, and surface treatment needs;
Quotation & Proposal: Process plan and quotation within 2 hours, including material recommendations, lead time, and cost details;
Production & Delivery: Start production upon confirmation, real-time progress updates, nationwide free shipping, and on-site inspection available.
If you need to customize the cross pile point (pipe pile tip) according to the project size, or want to know more about product prices, delivery time and technical parameters, please contact us directly. Our professional team will provide you with one-stop solution and high-quality after-sales service for your needs.
